Bifferboard can't load global image as of 8:15am 25/1

All about tiny Bifferboards used as Meteoplug clients
Post Reply
gcams
Posts: 8
Joined: Thu Jun 30, 2011 8:47 am

Bifferboard can't load global image as of 8:15am 25/1

Post by gcams » Wed Jan 25, 2017 12:00 pm

As of 8:15 this morning, my bifferboard appears to be stuck in an endless loop and is not reporting in:

Code: Select all

info: Jan 25 08:15:37 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 started loading global image (hw=bb)
info: Jan 25 08:20:33 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 successfully loaded global image (hw=bb, blocks=44)
info: Jan 25 08:20:54 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 started loading global image (hw=bb)
warning: Jan 25 08:24:12 psi METEONET 00:B3:F6:00:8C:D0: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
info: Jan 25 08:24:12 psi METEONET 00:B3:F6:00:8C:D0: Feeded networks: metoffice
info: Jan 25 08:26:22 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 successfully loaded global image (hw=bb, blocks=44)
info: Jan 25 08:28:47 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 started loading global image (hw=bb)
info: Jan 25 08:33:44 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 successfully loaded global image (hw=bb, blocks=44)
info: Jan 25 08:34:05 psi GETIMAGE 00:B3:F6:00:8C:D0: client 101.182.155.16 started loading global image (hw=bb)
Is my bifferboard dead, or is this a problem with the image it's pulling from the server (corrupt image??)

gcams
Posts: 8
Joined: Thu Jun 30, 2011 8:47 am

Re: Bifferboard can't load global image as of 8:15am 25/1

Post by gcams » Thu Jan 26, 2017 10:35 pm

Just thought I'd post a reply to say this issue corrected itself earlier today, without any change at my end. I'm still perplexed as to what happened.

In any case, I've now upgraded to a TPLink client, just in case the Bifferboard was on it's way out (even though it did come good in the end).

Post Reply