Old Meteoplug Forum - now read-only!

Hello - Thanks for the explanation. That helps me understand the problem. I rebooted and was updated to 3345. The system panel shows a 2% increase in free RAM, about 4k. Not a lot, but it might be enough. I'll let you know. Platform: TP-LINK TL-MR3020 RAM: 29364 kB total, 1976 kB free (93% used) Sof...

Hello again - Still having the problem: Meteoplug is loosing data after about 20 - 22 hrs of service. Realtime data continues but 10 min upload graphing data stops. I'm using a Meteobridge (see above) but it's running with only 5% memory free. I don't know why. One other point: The setup of Meteobri...

Sent

Sent.

System tab right after a reboot Platform: TP-LINK TL-MR3020 RAM: 29364 kB total, 1720 kB free (94% used) Software Version: Linux/OpenWrt 3.3.8 mips (BE), FW 1.2, MeteoBridge 2.1 (3325) Version Control: on next reboot Uptime: 0 hours, 2 minutes Buffer Usage: and Messages wnetd (16.02.2014 09:20:02): ...

AcuRIte 01050C/01055 sensors report to AcuRite Bridge. The Bridge is connected by ethernet to TP-LINK TL-MR3020 flashed as a Meteobridge, 2.1. The TL-MR3020 connects to my LAN via wi-fi. Meteobridge uploads to both WU and Meteoplug every 10 minutes, along with real-time data every 10 seconds. The Ac...

Hello I upload to Meteoplug using a Meteobridge TL-MR3020 server very 10 mins, and live every 30 secs. Once a day, Meteoplug processing on the upload stops. I think continues to be uploaded, but graphing stops. Data sent to WU continues fine. To get Meteoplug to start processing again, I need to reb...

I'm seeing the same problem: a newby seeing intermittent outages using meteobridge to uploade to meteoplug. I restore the connection by restarting meteobridge through the meteobridge interface rather than powering down. Before I loose touch with the server, my client log shows this, recurring logger...