Old Meteoplug Forum - now read-only!

Hi..

I have Davis Vantage pro2 with..
1. soil/moisture station ( 2 soil sensor / 1 leaf sensor / 1 temperature sensor )ž
2. temperature / humidity station
4.Alix 3D3 with installed licensed meteohub ( 4.9k (Build 6680))
3. USB data logger

Basic problem is to get all readings from leaf/soil station !!!
Can anybody help with that...?

On sensors tab I have...

Station 0 (Vantage): vinarija
Type # ID Name Last Signal Sensor Data
wind 0 2 sec 0.4(0.0)m/s ENE
rain 0 46 sec 0.0mm/h
indoor 0 28 sec 26.6°C 53% 1020.8mb (1020.8mb) fc:2
outdoor 0 54 sec 19.8°C 64%
extra-1 1 14 sec -13.3°C 66%
soil-1 10 46 sec 22.8°C
leaf-1 15 46 sec 22.8°C 0wet

i gues this is related to meteohub, not meteoplug. therefore, wrong forum?

Thanks for the help