Old Meteoplug Forum - now read-only!

Hello -

I have been experiencing intermittent outages with my Meteobridge uploading data to the Meteplug servers. I have experienced three such outages in the last week or so and today is my fourth. To rectify the issue I do a power cycle of my meteobridge rig and all appears to be fine until the next outage.

I just recently signed up for the service so I am still learning my way around. Please let me know if there is something that needs to happen on my end.

Thanks
g

Edit - As a side note .. my Twitter feed(started today) is working correctly along with my Saratoga templated weather site as well all other weather data being uploaded from my meteobridge rig.

I'm seeing the same problem: a newby seeing intermittent outages using meteobridge to uploade to meteoplug. I restore the connection by restarting meteobridge through the meteobridge interface rather than powering down.

Before I loose touch with the server, my client log shows this, recurring
logger (15.02.2014 11:29:23): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory
logger (15.02.2014 11:55:34): open named pipe "/dev/meteobridge" failed: No such device or address
logger (15.02.2014 11:55:34): open named pipe "/dev/meteobridge" failed: No such device or address
logger (15.02.2014 12:19:24): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory
logger (15.02.2014 12:29:24): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory

what does "system" tab on Meteobridge say about storage usage?

System tab right after a reboot

Platform: TP-LINK TL-MR3020
RAM: 29364 kB total, 1720 kB free (94% used)
Software Version: Linux/OpenWrt 3.3.8 mips (BE), FW 1.2, MeteoBridge 2.1 (3325)
Version Control: on next reboot
Uptime: 0 hours, 2 minutes Buffer Usage:

and
Messages
wnetd (16.02.2014 09:20:02): process started.
logger (20.02.2014 18:40:58): Historical data loaded (23 records).
logger (20.02.2014 18:40:58): data logger (version 4.9w, build 3325) started.
logger (20.02.2014 18:41:00): connect station 0 (AcuLink via USB HID).
logger (20.02.2014 18:41:07): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory

storage use is too high. could you please send the MAC of your Meteobridge to "info(at)meteobridge.com"?

Sent.