Meteoplug data not being recorded

[hymrog]

Hello -

I have been experiencing intermittent outages with my Meteobridge uploading data to the Meteplug servers. I have experienced three such outages in the last week or so and today is my fourth. To rectify the issue I do a power cycle of my meteobridge rig and all appears to be fine until the next outage.

I just recently signed up for the service so I am still learning my way around. Please let me know if there is something that needs to happen on my end.

Thanks
g

Edit - As a side note .. my Twitter feed(started today) is working correctly along with my Saratoga templated weather site as well all other weather data being uploaded from my meteobridge rig.

[Mcmorgan]

I'm seeing the same problem: a newby seeing intermittent outages using meteobridge to uploade to meteoplug. I restore the connection by restarting meteobridge through the meteobridge interface rather than powering down.

Before I loose touch with the server, my client log shows this, recurring
logger (15.02.2014 11:29:23): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory
logger (15.02.2014 11:55:34): open named pipe "/dev/meteobridge" failed: No such device or address
logger (15.02.2014 11:55:34): open named pipe "/dev/meteobridge" failed: No such device or address
logger (15.02.2014 12:19:24): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory
logger (15.02.2014 12:29:24): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory

[admin]

what does "system" tab on Meteobridge say about storage usage?

[Mcmorgan]

System tab right after a reboot

Platform: TP-LINK TL-MR3020
RAM: 29364 kB total, 1720 kB free (94% used)
Software Version: Linux/OpenWrt 3.3.8 mips (BE), FW 1.2, MeteoBridge 2.1 (3325)
Version Control: on next reboot
Uptime: 0 hours, 2 minutes Buffer Usage:

and
Messages
wnetd (16.02.2014 09:20:02): process started.
logger (20.02.2014 18:40:58): Historical data loaded (23 records).
logger (20.02.2014 18:40:58): data logger (version 4.9w, build 3325) started.
logger (20.02.2014 18:41:00): connect station 0 (AcuLink via USB HID).
logger (20.02.2014 18:41:07): cannot open pipe "gzip >/var/run/meteohub/inetupload.z": Cannot allocate memory

[admin]

storage use is too high. could you please send the MAC of your Meteobridge to "info(at)meteobridge.com"?

[Mcmorgan]

Sent.